Running The Telephone Menu Script - Nortel Remote Gateway 9110 Installation And Administration Manual

June 2005

Running the telephone menu script

After installing and powering up the Remote Gateway 911x series unit:
1 Press the release key four times within three seconds to access the
telephone menu.
Result: The telephone display prompts you for a user name, similar to the
following:
Enter User Name
Press the Rls key to exit.
2 Enter the digits 48378 (GUEST) and then press the Hold key.
Result: The telephone display prompts you for a password, similar to the
following:
Enter Password
Press the Rls key to exit.
Remote Gateway 911x Series Installation and Administration Guide
Configuring the 911x unit using the telephone menu
75