Changing configuration settings using Configuration Manager
Emergency service programmability
There can be multiple emergency services at any one Remote Gateway 911x
series unit location, such as police, fire, and poison control. Click on the
Emergency Feature button to configure as many up to three different
emergency activation codes for one Remote Gateway 911x series unit. The
particular emergency activation code dialed by the user determines the digits
sent to the host PBX and the telephone number sent to the Central Office (CO).
Also, in their haste to reach an emergency service, some users can forget to dial
trunk access digits. You can configure your Remote Gateway 911x series unit to
send the emergency telephone number to the CO whether or not the user dials
trunk access digits.
Note: If you must contact emergency personnel with consecutive calls, you must
press the digits of the Emergency Access Code each time. Do not use last
number re-dial or the autodial keys.
Configuring the system settings
To configure the system settings:
1
Complete the fields as described in the "911x System Configuration field
descriptions" on page 110.
2
Click on the OK button to save the information in the temporary work file.
108
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0