Configuration - Device And Software - Nortel Remote Gateway 9110 Installation And Administration Manual

Remote Gateway 911x Series description
The Remote Gateway 911x series unit can also use the PSTN to route calls if:
the voice QoS degrades below user-configured thresholds
You can configure QoS Transitioning Technology to automatically
transition calls to the PSTN when the voice QoS degrades below a
threshold you have chosen. Calls transition back to the IP network when the
QoS returns to an acceptable level. For more information, refer to "QoS
Transitioning Technology" on page 12.
you are not yet ready to use the IP network to send voice calls
You can configure the Remote Gateway 911x series unit to use only the
PSTN connection, and implement IP network functionality when you are
ready. If you choose to use only the PSTN connection, you must set up a
permanent connection to the PSTN. Otherwise, be prepared to wait
approximately 8 to 10 seconds for dial tone while modem training occurs.
For more information on permanent and on-demand connections, refer to
"RLC port configuration" in the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210).

Configuration - device and software

To make the Remote Gateway 911x series unit operational, some configuration
is required. You can use the following tools to configure the Remote Gateway
911x series unit:
telephone menu
You must use the telephone menu to configure the Remote Gateway 911x
series unit initially.
For detailed instructions on using the telephone menu, refer to Chapter 4,
"Configuring the 911x unit using the telephone menu".
Remote Gateway 9100 Series Configuration Manager
Remote Gateway 9100 Series Configuration Manager is a Windows-based
application for accessing the Remote Gateway 911x series unit
configuration settings. Once you have configured the Remote Gateway
911x series unit, you can use Configuration Manager to make configuration
changes and perform ongoing administration.
For more details, refer to Chapter 5, "Changing configuration settings using
Configuration Manager", and Chapter 7, "Administration".
4 Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0