Cfg/ Vpn #/Syslog Syslog Vpn Configuration - Nortel 3050 Command Reference Manual

/cfg/ vpn #/syslog Syslog VPN configuration

[Syslog Per VPN Menu]
list
del
add
insert
move
Using this menu, syslog can be configured per VPN. All VPN specific
syslog messages are sent to both the global syslog and the VPN syslog.
Table 169
Syslog Per VPN Menu (/cfg/ vpn #/syslog)
Command usage syntax
list
Displays all configured VPN by their index number, IP address, and facility number.
del <index number>
Removes the specified VPN syslog from the system configuration. Use the list
command to display the index numbers of all added VPN syslog.
add <IP address of VPN syslog><local facility number>
Adds a VPN syslog to the system configuration. When adding a VPN syslog you will
be prompted for both the IP address and the local facility number. The local facility
number can be used to uniquely identify syslog entries.
insert<index number to insert at><IP address of vpn syslog to add><local
facility number>
Assigns a specific index number to the VPN syslog you add. The index number
you specify must be in use. VPN syslogs with an index number higher than (and
including) the one you specify will have their current index number incremented by 1.
insert<index number to move><destination index number>
Moves a VPN syslog up or down in the list of configured servers. The index numbers
you specify must be in use. To view all VPN syslogs currently added to the system
configuration, use the list command
cfg/vpn <id>/sslclient/mobility Mobility configuration
[Mobility Menu] roaming - Enable mobility per VPN or per group roamtime -
Mobility Roamtime per VPN or per group
Copyright © 2007 Nortel Networks
.
cfg/vpn <id>/sslclient/mobility Mobility configuration 419
- List all values
- Delete a value by number
- Add a new value
- Insert a new value
- Move a value by number
Note:
Per syslog VPN is available only with SSP license.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007