June 2005
Configuring automatic upgrade
To configure automatic upgrade of your Remote Gateway 911x series unit,
complete the following steps:
1
Access the Auto Upgrade Configuration property sheet.
2
Complete the fields as described in "Auto Upgrade Configuration field
descriptions" on page 130.
3
Click on the OK button.
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
4
Click on the Send button to update the Remote Gateway 911x series unit
with the new information.
Note: To save changes to the Remote Gateway 911x series unit's Flash
memory, select Upload
Remote Gateway 911x Series Installation and Administration Guide
Changing configuration settings using Configuration Manager
→
Save to Flash from the Menu Bar.
129