Nortel Remote Gateway 9110 Installation And Administration Manual page 208

Administration
Ethernet Interface Statistics field descriptions
The following table describes the statistics on the Ethernet Interface Statistics
screen:
Statistic
Channel
LAN Drv
Admin
Oper
IfcType
IfcNo
MTUlen
Speed
Rx - Octet
UPkts
184
Description
Identifies the Ethernet device that the statistics on that
line apply to.
Valid value is 1.
Identifies the LAN driver used by the call.
Identifies the administrative state of the port.
Valid values are 1 (Enabled) and 0 (Disabled).
Identifies the operational state of the port.
Valid values are 1 (Up) and 0 (Down).
Identifies the interface type used by the call.
Identifies the Ethernet interface used by the call.
Valid values are 0 (ELAN) and 1 (CLAN).
Identifies the Maximum Transmission Unit for this
interface in bytes.
Identifies the data rate of this interface in Mbps.
Identifies the number of bytes received on the given
channel since the statistics were last reset.
Identifies the number of packets with a unicast
Ethernet address that directly matches the Ethernet
address of the identified unit. This statistic describes
the period of time since the statistics were last reset.
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0