Nortel Remote Gateway 9110 Installation And Administration Manual page 120

Configuring the 911x unit using the telephone menu
15 The telephone display asks if you want to modify the current analog
localization setting for this Remote Gateway 911x series unit, similar to the
following:
Modify Localization?
[1-Yes 2-No]
IF you want to
modify the line
characteristics of
PSTN
connections in
your particular
location,
retain the current
localization
settings for this
Remote Gateway
911x series unit,
16 The telephone display asks if you want to modify the current modem tones
setting for this Remote Gateway 911x series unit, similar to the following:
Modify Modem Tones?
[1-Yes 2-No]
96
THEN do the following:
1 Press 1.
2 Press the Hold key.
Result: The telephone display asks you to enter the
analog localization setting. The telephone display
also shows the current setting, similar to the
following:
Analog Localization
0-FCC 1-CTR21 2-Custom:1
3 Choose from the options presented.
4 Press the Hold key.
5 Proceed to step on page 96.
1 Press 2.
2 Press the Hold key.
Remote Gateway 911x Series Installation and Administration Guide
Standard 3.0