Advertisement
Resetting Watch Settings
This section explains how to return the watch
time, date, and other settings, as well as the
log to their initial factory defaults.
Important!
Once you perform a reset operation,
●
you cannot restore pre-reset settings.
Reset the watch settings is not
●
possible under the conditions
described below.
While the battery level indicator is
ー
or lower
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
This displays the GENERAL SETTINGS
screen.
7.
Use (A) and (D) to move the pointer to
[RESET].
8.
Press (C).
Watch Operation Guide 3515
9.
Use (A) and (D) to move the pointer to
[YES].
To stop the reset operation, move the
●
pointer to [NO].
10.
Press (C).
After the reset operation is complete, the
watch will return to the current time
screen. The reset operation is complete
when [AC] appears in the lower right
corner of the display.
11.
Press (A) to clear [AC] from the display.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Phone Finder
You can use phone finder to trigger a sound
on the paired phone to help you find it. The
sound operation is performed even if your
phone is in vibrate mode.
Important!
Phone finder will not sound the tone
●
unless the CASIO WATCHES phone
app is running on the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to move the pointer to
[PHONE FINDER].
4.
Press (C).
This will establish a connection between
the watch and phone, and sound the
phone's ringtone.
It will take a few seconds before the
●
phone tone sounds.
[FAILED] appears when a phone finder
●
operation is unsuccessful.
5.
Press any button to stop the sound.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Note
Connection with your phone is not
●
possible while the watch's Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
Entering the Watch Airplane Mode
l
88
Advertisement
