Advertisement
7.
Use (A) and (D) to move the pointer to
[POWER SAVING].
8.
Press (C).
This enables power saving and displays
[PRESS AND HOLD THIS BUTTON] at
the bottom of the screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
Disabling Power Saving
Hold down (E) for at least two seconds to
disable power saving.
Disabling power saving causes [PRESS
●
AND HOLD THIS BUTTON] to disappear at
the bottom of the screen.
Watch Operation Guide 3515
Changing the Length and
Weight Units
You can select metric units (km, m, cm, kg) or
imperial units (mile, yd, ft, lb) for length (height,
distance, altitude) and weight (body weight)
values.
Important!
When Tokyo (TOKYO) is the Home
●
City, value units are fixed as metric
(km, m, cm, kg) and cannot be
changed.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
This displays the GENERAL SETTINGS
screen.
7.
Use (A) and (D) to move the pointer to
[UNITS].
8.
Press (C).
9.
Use (A) and (D) to move the pointer to
[LENGTH & WEIGHT].
10.
Press (C).
11.
Use (A) and (D) to select the length and
weight units you want.
[km/m/cm & kg] Metric System
[mile/yd/ft & lb] Imperial System
12.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the unit setting screen re-
appears.
13.
Hold down (E) for at least one second to
return to the current time screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
You can also use the CASIO
●
WATCHES phone app to change the
length unit.
83
Advertisement
