Advertisement
7.
Use (A) and (D) to move the pointer to
[STEP REMINDER].
8.
Press (C).
9.
Use (A) and (D) to select the step reminder
ON/OFF setting you want.
[OFF]
Step reminder function off
[ON]
Step reminder function on
10.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the step reminder function
setting screen re-appears.
11.
Hold down (E) for at least one second to
return to the current time screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
Even if step reminder is turned on, the
●
watch will not perform notification if any
one of the conditions below exists.
When the watch detects it is not
ー
being worn
While the current time is within the
ー
period defined by the bedtime and
wake-up times you specified
While an activity is in progress
ー
While the battery level indicator is
ー
or lower
When there is a sensor error
ー
If behavior analysis does not detect
●
walking and running, the watch may
notify you that the step reminder
function determined the number of
steps is low.
Clearing an Ongoing Notification
●
Press any button to clear an ongoing step
reminder notification.
Watch Operation Guide 3515
Specifying the Night Time
Specify your night time.
After you specify your night time, you can link
notification reception from your phone and
your heart rate measurement settings NIGHT
TIME.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
This displays the GENERAL SETTINGS
screen.
7.
Use (A) and (D) to move the pointer to
[NIGHT TIME].
8.
Press (C).
This causes a cursor to appear at the hour
setting of the night time start time.
9.
Use (A) and (D) to change the start time
hour setting.
Hours
10.
Press (C).
This causes the cursor to move to the start
time minute setting.
11.
Use (A) and (D) to change the start time
minute setting.
12.
Press (C).
This causes the cursor to move to the end
time hour setting
13.
Use (A) and (D) to change the end time
hour setting.
Hours
14.
Press (C).
This causes the cursor to move to the end
time minute setting.
Minutes
79
Advertisement
