Advertisement
Value Screen
①
②
③
With heart rate graph
①
②
③
Current heart rate
A
Maximum heart rate
B
Current day's high heart rate
Minimum heart rate
C
Current day's low heart rate
Heart rate graph
D
The heart rate graph shows data for up
●
to eight hours.
One division of the heart rate graph
●
shows the range of maximum and
minimum values measured over four
minutes.
Note
If you do not perform any operation for
●
about one hour while using the HEART
RATE (heart rate measurement)
function, the watch will return to the
current time screen.
Watch Operation Guide 3515
Using Heart Rate
Measurement
During heart rate measurement, your current
heart rate is shown on other screens besides
the HEART RATE (heart rate measurement)
function screen.
For more accurate display values, create
●
your profile before using heart rate
measurement.
Creating Your Profile
l
To enable or disable heart rate
●
measurement
While heart rate measurement is enabled, the
watch displays your current heart rate.
④
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
7.
Use (A) and (D) to move the pointer to [HR
TRACKING].
8.
Press (C).
This displays the heart rate measurement
enable/disable screen.
Pointer
9.
Use (A) and (D) to select ON/OFF setting.
Enables heart rate
[ON]
measurement
Enables heart rate
measurement during
[ACTIVITY & NIGHT
activity measurement,
TIME ON]
within the specified
night time only
Disables heart rate
[OFF]
measurement
10.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the GENERAL SETTINGS
screen re-appears.
11.
Hold down (E) for at least one second to
return to the current time screen.
37
Advertisement
