Advertisement
Connecting with a Phone Paired
With the Watch
Your watch automatically connects with its
paired phone.
The
symbol is displayed at the top of the
e
watch screen while the watch is connected
with a phone.
flashes when there is no
e
connection between the watch and a phone.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with your phone
l
D
Important!
If you have problems establishing a
●
connection, it could mean that CASIO
WATCHES phone app is not running
on your phone. On your phone's home
screen, tap the "CASIO WATCHES"
icon. Perform the operation shown on
the screen to pair with the watch.
If you cannot connect to the paired phone and
data such as activities are not transferred to
the phone, perform the procedure below to
reconnect.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [CONNECT].
4.
Press (C).
This establishes a Bluetooth connection.
When the connection is established,
●
[CONNECTED] appears and is then
replaced by [CONNECT] after a few
seconds.
The data is transferred to your phone.
If the connection fails, [FAILED]
●
appears on the display.
Watch Operation Guide 3515
Unpairing
Unpairing the watch from a phone requires
both CASIO WATCHES phone app and watch
operations.
Note
If you are using an iPhone, also delete
●
the pairing information stored on the
phone.
The watch cannot be unpaired from a
●
phone while the watch's Airplane
Mode is enabled. To unpair from your
phone, disable the watch's Airplane
Mode.
Entering the Watch Airplane Mode
l
Deleting Pairing Information from the
●
CASIO WATCHES phone app
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Tap the "My Watch" tab.
3. Y
Tap the watch you want to unpair.
4. Y
Tap the "
5. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
●
Watch
1. X
Display the current time.
Watch Mode
l
2. X
Hold down (A) for at least two seconds.
This enters the Control Mode.
3. X
Use (A) and (D) to select [SETTING].
4. X
Press (C).
This displays the setting menu screen.
Pointer
5. X
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
".
6. X
Press (C).
7. X
Use (A) and (D) to move the pointer to
[PAIRING].
8. X
Press (C).
9. X
Use (A) and (D) to move the pointer to
[UNPAIRING].
Pointer
10. X
Press (C).
11. X
Use (A) and (D) to select whether or not
you want to delete the pairing information.
[YES] Deletes pairing information.
[NO]
Does not delete pairing information.
12. X
Press (C).
After deletion of the pairing information is
complete, [UNPAIRED] appears for a few
seconds, and then the display returns to
the screen in step 9 of this procedure.
13. X
Display the current time.
Watch Mode
l
15
Advertisement
