Turning Off an Alarm
To stop an alarm sound and/or vibration
operation, perform the steps below to turn it
off.
To reactivate an alarm sound and/or
●
vibration operation, turn it back on.
Note
An indicators is displayed while any
●
one of the alarms is turned on.
The alarm indicator is not displayed
●
while all of the alarms are turned off.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[WATCH SETTINGS].
6.
Press (C).
This displays the watch setting screen.
Watch Operation Guide 3515
7.
Use (A) and (D) to move the pointer to
[ALARM].
8.
Press (C).
9.
Use (A) and (D) to move the pointer to the
alarm you want to turn off.
10.
Press (C).
11.
Use (A) and (D) to select [OFF].
12.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the alarm selection screen re-
appears.
13.
Hold down (E) for at least one second to
return to the current time screen.
Turning off all alarms causes [ALM]
●
(alarm) to disappear from the display.
Note
If [ALM] (alarm) is still displayed after
●
you turn off an alarm, it means at least
one of the other alarms is still turned
on. To turn off all alarms, repeat steps
8 through 11 until the [ALM] (alarm)
indicator is no longer displayed.
If [ALM] (alarm) is still displayed even
●
after you turn off all the alarms, it
means the smart alarm is turned on.
Turn off the smart alarm.
Turning Off Smart Alarm
l
Stopwatch
The stopwatch can be used to perform 1-
second unit elapsed time measurement up to
99 hours, 59 minutes, 59 seconds.
It can also measure split times.
Measuring Elapsed Time
1.
Display the current time screen.
Watch Mode
l
2.
Use (A) and (D) to select [STOPWATCH].
3.
Press (C).
This displays the stopwatch screen.
4.
Use the operations below to measure
elapsed time.
Start
C
C
Stop
Resume
C
Stop
C
Hour, minute, second
5.
Press (E) to reset the stopwatch to all
zeros.
60