Do not operate the crown or buttons while ー retailer or to an authorized CASIO service Example of Daily Use your watch is submersed in water or wet. center. Hand washing, rain Avoid wearing your watch while in the ー ...
Page 3
The extent of malfunction and damage to electronic such damage depends on usage conditions components. Note that CASIO Computer Co., Ltd. and storage conditions. assumes no responsibility for any Electrostatic Charge ●...
Watch Operation Guide 3529 General Guide Indicators Before Getting Started The LCD type (dark figures on light ① ② background, light figures on dark background) depends on the watch model. This section provides an overview of the watch The LCD type is fixed and cannot be ●...
Watch Operation Guide 3529 Navigating Between Modes Time Adjustment Keep pressing (C) until the setting you want to change is flashing. Press (C) to cycle between modes. Each press of (C) moves the flashing to Use the procedures in this section to adjust the ●...
Watch Operation Guide 3529 Switching between 12-hour and 24- ● Alarm Keep pressing (C) until the setting you hour Timekeeping want to change is flashing. You can specify either 12-hour format or 24- Each press of (C) moves the flashing to hour format for the time display.
Watch Operation Guide 3529 To stop the alarm ● Enabling/Disabling an Alarm Turning Off an Alarm or the To stop the alarm after it starts to sound when or the Hourly Time Signal Hourly Time Signal an alarm time is reached, press any button.
Watch Operation Guide 3529 Measuring a Split Time Timing the First and Second Stopwatch Place Finishers Enter the Stopwatch Mode. The stopwatch can measure elapsed time up Navigating Between Modes Enter the Stopwatch Mode. to 23 hours, 59 minutes, 59 seconds (24 Navigating Between Modes hours).
Watch Operation Guide 3529 Setting the Time Timer Press (C). This causes the seconds digits to flash. The countdown start time can be set in 1- second units up to 24 hours. The timer counts down from a start time specified by you.
Watch Operation Guide 3529 Using the Timer Other Settings Other Information Enter the Timer Mode. This section explains other watch settings you This section provides non-operational Navigating Between Modes can configure. information you also need to know. Refer to this information as required.
Watch Operation Guide 3529 Troubleshooting Alarm and Hourly Time Signal An alarm and/or the hourly time signal do not sound. Enable the alarm and/or the hourly time signal. Configuring Alarm Settings Enabling/Disabling an Alarm or the Hourly Time Signal Other I can’t find the information I need...