Advertisement
The message [NO DATA] will appear if
●
there are no new messages.
While notification receive is enabled,
●
reception of a notification causes its
contents to appear on the display,
regardless of the mode (Notification Cut-in).
Enabling and Disabling Incoming Call
l
Notifications
The watch performs a sound and/or
●
vibration operation when a notification is
received. You can enable or disable sound
and vibration alert as required.
Configuring Sound and Vibration
l
Settings
Important!
To receive phone notifications,
●
configure the settings below on your
phone.
iPhone: Enable CASIO WATCHES
phone app notifications.
Android: Enable the items below.
Notification access
Contacts access
Call history access
After the notification cut-in is displayed
●
for 1 minute, the display returns to the
screen that was shown before the cut-
in appeared. While a notification cut-in
is displayed, press (A) or (D) to check
the notification content.
Watch Operation Guide 3515
Enabling and Disabling
Incoming Call Notifications
You can enable or disable notification receive
as required.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (A) for at least two seconds.
This enters the Control Mode.
3.
Use (A) and (D) to select [SETTING].
4.
Press (C).
This displays the setting menu screen.
Pointer
5.
Use (A) and (D) to move the pointer to
[GENERAL SETTINGS].
6.
Press (C).
7.
Use (A) and (D) to move the pointer to
[NOTIFICATIONS].
8.
Press (C).
9.
Use (A) and (D) to select a notification
receive ON/OFF setting.
Notifications are turned
[OFF]
off, and notification cut-
ins do not appear.
Notification receive is
turned off during
[ACTIVITY OFF]
activity measurement
only.
Notification receive is
[NIGHT TIME OFF]
turned off during the
specified night time.
Notification receive is
turned off during
[ACTIVITY & NIGHT
activity measurement
TIME OFF]
and the specified night
time.
Enables receive and
[ON]
notification cut-in
display.
Notification cut-ins display the details of
●
a received notification.
After about one minute, the watch
●
returns to the screen that was shown
before the notification cut-in appeared.
10.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the GENERAL SETTINGS
screen re-appears.
11.
Hold down (E) for at least one second to
return to the current time screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
64
Advertisement
