Advertisement
Training Alert Screen
Indicators
A training alert screen appears on the watch
when a specified target value is reached
during activity measurement.
Indicator:
Meaning:
Calories burned target
value reached.
Elapsed time target
value reached.
Travel distance target
value reached.
Cumulative altitude
target value reached.
Note
Alerts that can be configured depend
●
on the activity.
Watch Operation Guide 3515
Alert Screen Switching
A training alert screen appears when a
specified target value is reached during
activity measurement.
Example:
The watch returns to the running
●
measurement screen if you press (C) or if
you do not perform any operation for about
nine seconds.
Configuring Distance Display
Settings
You can select either of two distance display
types: horizontal distance (straight-line
distance) or surface distance (actual
distance).
The surface distance display is calculated by
taking horizontal travel as well as vertical
movement into consideration.
1.
Display the current time screen.
Watch Mode
l
2.
Press (C).
This enters the Activity Mode.
Example:
3.
Use (A) and (D) to select an activity.
4.
Press (C).
This displays the GPS signal receive start
screen.
5.
Press (A) or (D).
This displays the measurement operation
ready screen.
6.
Hold down (A) for at least two seconds.
This displays the activity measurement
setting screen.
Pointer
7.
Use (A) and (D) to move the pointer to
[GPS TRACKING].
8.
Press (C).
9.
Use (A) and (D) to move the pointer to [3D
DISTANCE].
10.
Press (C).
11.
Use (A) and (D) to select a setting.
[ON]
Displays surface distance.
[OFF]
Displays horizontal distance.
12.
Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the GPS setting screen re-
appears.
13.
Press (E) to exit the setting screen.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
You can also use the CASIO
●
WATCHES phone app to change the
distance display type.
71
Advertisement
