Advertisement
Measuring a Split Time
1.
Display the current time screen.
Watch Mode
l
2.
Use (A) and (D) to select [STOPWATCH].
3.
Press (C).
This displays the stopwatch screen.
4.
Use the operations below to measure
elapsed time.
Start
C
E
Split
Stop
C
Hour, minute, second
5.
Press (E) to reset the stopwatch to all
zeros.
Watch Operation Guide 3515
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
The watch does not perform a vibration alert
●
while the battery level indicator shows
. The watch does not perform a beep
alert while the battery level indicator is
"CHG" or lower.
You can enable the beep and vibration
●
alerts as required.
Configuring Sound and Vibration
l
Settings
Setting a Start Time
The start time can be set in 1-second units up
to 60 minutes.
To configure timer settings with the
●
CASIO WATCHES phone app
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
Configuring Watch Settings
l
Timer
To configure timer settings with the
●
watch
EZ Settings
Use this procedure to change the timer start
time setting in 30-second increments.
1.
Display the current time screen.
Watch Mode
l
2.
Use (A) and (D) to select [TIMER].
3.
Press (C).
This displays the TIMER screen.
4.
Press (A) or (D).
This returns to the EZ setting screen.
5.
Use (A) and (D) to change the timer start
time setting.
Each press of (A) changes the setting
●
by -30 seconds, while (D) changes it by
+30 seconds.
6.
Press (C).
This starts the timer operation.
61
Advertisement
