Control Symbols Overview - Danfoss ET5040 Operator's Manual

Danfoss ET5040 Crimp Machine Operator's Manual

Control Symbols Overview

The following symbols and buttons are utilized in the operation of the crimp machine:
Emergency Stop Button – In the
event of an emergency, press the
red emergency stop button on the
front of the control panel. To restart,
pull and twist the emergency stop
button.
Closes the crimp tooling.
Takes you to the machine
settings.
Displays the next screen.
6 | ©Danfoss ET5040 Crimp Machine Operator's Manual | 2022.10.
Motor off – to switch off the
hydraulic motor.
Takes you back to the Home
screen.
User name.
Exits existing screen, and
returns to menu screen.
Motor on – to switch on the
hydraulic motor.
Crimp tooling opens automatically
after crimping.
Password entry.
Activates foot switch control.
Opens the crimp tooling.
Crimp tooling does not open
automatically after crimping.
Manual retract required.
Takes you back to the previous
screen.
Crimp Nominal Diameter.
BC425481951279en-000101