Controller Log-In; Language - Danfoss ET5040 Operator's Manual

Danfoss ET5040 Crimp Machine Operator's Manual
Settings
!
NOTE:TWalk through all machine settings during initial machine set-up.
Setting #1 - Controller Log-in
Figure 31
Select the settings icon to access
the settings menu's. (See figure 31)

Language

Select desired language by selecting "Flag" icon. (See figure 33)
Figure 33
18 | ©Danfoss ET5040 Crimp Machine Operator's Manual | 2022.10.
Enter your user name.
Note: Factory default is "user". (See
figure 32)
Figure 32
Enter your password.
Note: Factory default is "user". (See
figure 32)
Displays the language
selected. (See figure 33)
Press the "Check" icon to log-in to
the "Settings" Menu.
Press forward arrows to
display the next "Settings
Menu".
BC425481951279en-000101