Danfoss ET5040 Operator's Manual page 14

Danfoss ET5040 Crimp Machine Operator's Manual
Operating Instructions
Crimp Selections - Auto Mode Continued
Crimp tooling diameter.
Crimp Position Specification.
Add current selection to Favorites
Menu.
Opening Diameter. The tool auto-
matically retracts to set opening
diameter after crimp when green
icon is displayed. (Touch to set).
Current Tooling Position
14 | ©Danfoss ET5040 Crimp Machine Operator's Manual | 2022.10.
Takes you back to the Home screen.
Crimp Position Tolerance.
Open Favorites Menu.
Displays product information.
Crimp diameter tolerance.
Correction / offset to diameter.
Crimp tooling does not open auto-
matically after crimping. Manual
retract required. (Touch to change)
Returns you to Home screen.
Crimp diameter tolerance.
Takes you back to the previous
screen.
Crimp tooling opens automatically
after crimping.
Displays the next screen.
BC425481951279en-000101