6.01
Introduction
A.
Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
6.03
6.04
6.05
6.06
6.07
6.08
6.09
NOTE!
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B.
Returns
If a product must be returned for service, contact your distributor. Materials returned without proper
authorization will not be accepted.
6.02
Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed
in the parts list for each type item. Also include the model and serial number of the power supply.
Address all inquiries to your authorized distributor.
6.03
Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power
cable, gas pressure regulator / filter, and operating manual. Some parts may not be available in your area.
Qty
Description
1
CutMaster 60i Power Supply
208/230 - 480VAC, SINGLE Phase, 60Hz,
with input power cable and plug
1
208/230 - 480VAC, THREE Phase, 60Hz,
with input power cable and plug
1
CutMaster 60i Power Supply
400VAC, THREE Phase, 60Hz,
with input power cable and plug
1
400VAC, THREE Phase, 60Hz,
with input power cable and plug
0-5561
SECTION 6: PARTS LISTS
Power Supply Replacement
Replacement Power Supply Parts
Options and Accessories
External Replacement Parts (Plastic)
Replacement Parts for SL60QD™ Hand Torch
Torch Consumable Parts (SL60 / SL60QD™)
Torch Consumable Parts SL100
PARTS LIST
CUTMASTER 60i
Catalog #
3-5630-1
3-5630-2
3-5630-4
3-5630-3C
65