ESAB THERMAL DINAMICS CUTMASTER 60i Operating Manual page 3

WARNING
!
Read and understand this entire Manual and your employer's safety practices before installing, operating, or
servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgment, the Manufacturer
assumes no liability for its use.
Plasma Cutting Power Supply
CutMaster™ 60i
SL60QD™ 1Torch™
Operating Manual Number 0-5561
Published by:
ESAB Group Incorporated
2800 Airport Rd.
Denton, Texas 76207
www.esab.com
© Copyright 2019 by
Thermal Dynamics an ESAB brand.
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the
publisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for
any loss or damage caused by any error or omission in this Manual, whether such
error results from negligence, accident, or any other cause.
For Material Print Specifications, refer to document 47x1961
Original Publication Date: 25 February, 2019
Revision Date:
See website for Warranty Information.
Record the following information for Warranty purposes:
Where Purchased:_______________________________ _____________________
Purchase Date:__________________________ ____________________________
Power Supply Serial #:_______________________________ _________________
Torch Serial #:______________________________ _________________________
i i