Parts Lists; Introduction; Ordering Information; Power Supply Replacement - ESAB Cutmaster 60 Operating Manual

6.01

Introduction

A. Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
6.03

Power Supply Replacement

6.04 Replacement Power Supply Parts
6.05 Options and Accessories
6.06 Replacement Parts for Hand Torch
6.07 Replacement Parts - for Machine Torches with Unshielded Leads
6.08 Replacement Shielded Machine Torch Leads Assemblies
6.09 Torch Consumable Parts (SL60)
6.10 Torch Consumable Parts (SL100)
NOTE!
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper authoriza-
tion will not be accepted.
6.02

Ordering Information

Order replacement parts by catalog number and complete description of the part or assembly, as listed in
the parts list for each type item. Also include the model and serial number of the power supply. Address all
inquiries to your authorized distributor.
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power cable,
gas pressure regulator / filter, and operating manual.
Qty
1
Manual 0-5402
SECTION 6:

PARTS LISTS

Description
ESAB CutMaster 60 Power Supply CCC version
®
400VAC, 3 Phase, with input power cable
PARTS LIST
ESAB CuTmASTEr 60
Catalog #
C559311303
6-1