Appendix 1: Data Tag Information - ESAB THERMAL DINAMICS CUTMASTER 60i Operating Manual

Model:
Date of Mfr:
Type of Power
1 or 3
Supply (Note 1)
Plasma Cutting
Symbol
Rated No-
Load Voltage
Input Power
Symbol
Input Power
Specifications
(Phase, AC or DC
Hertz Rating)
Degree of Protection
NOTES:
1. Symbol shown indicates single- or three-phase AC input,
static frequency converter-transformer-rectifier, DC output.
2. Indicates input voltages for this power supply. Most power
supplies carry a label on the bottom of the unit showing input
voltage requirements for the power supply as built.
3. Top row: Duty cycle values.
Duty cycle values meet or exceed the
IEC specified rating.
Second row: Rated cutting current values.
Third row: Conventional load voltage values.
4. Sections of the Data Tag may be applied to separate areas
of the power supply.
0-5561

APPENDIX 1: DATA TAG INFORMATION

Hermosillo, Sonora, Mexico
f
1
f
2
Output Current Type
X
I
U
0 =
U
2
Conventional
Load Voltage
U
1
1
1Ø
Rated Supply
Voltage (Note 2)
S/N
Made in Mexico
Duty Cycle Factor
Rated Maximum
Supply Current
I
I
1max 1e
3Ø 1Ø 1 3Ø
Standard Symbols
Ø
APPENDIX
CUTMASTER 60i
Manufacturer's Name and/or
Logo, Location, Model and
Revision Level, Serial Number
and Production Code
Regulatory Standard Covering
This Type of Power Supply
Output Range (Amperage/
Voltage)
Duty Cycle Data (Note 3)
Maximum E ective
Supply Current
Manufacturer's Electrical
Schematic File Number
and Revision Level
AC
DC
Phase
Art # A-13265_AB
71