ESAB THERMAL DINAMICS CUTMASTER 60i Operating Manual page 18

CUTMASTER 60i
Generator Recommendations
When using generators to power the 60i Plasma Cutting System, the following ratings are a minimum
and are to be used along with the ratings listed above.
Generator Output Rating 60i Output Current Arc Characteristic
NOTE!
Due to circuitry, age and condition two generators with the same ratings may produce different results. Adjust the
amperage accordingly.
7.847
199.3 mm
14.146"
359.3 mm
536.47 mm
35 lb / 15.875 kg
Power Supply Dimensions & Weight
18
60i Generator Specifications
15 kW
12 kW
10 kW
Art # A-13252
21.121"
60A
60A
45A
45A
30A
15"
Art # A-13247
381 mm
Ventilation Clearance Requirements
INTRODUCTION
Full
Limited
Full
Limited
Full
0-5561