GE Transport Pro Service Manual page 91

Accessing the Review Errors Menu Option Item
Revision A
Troubleshooting: Service Menus
To access the error log and learn more about the Review Errors menu
option item, follow these steps:
1. Rotate and press the Trim Knob control to select REVIEW
ERRORS from the Service Mode Menu.
2. The review errors menu option items include four possible selections;
one each for viewing output or input errors along with one each for
clearing output or input errors. Rotate and press the Trim Knob
control to scroll to and select VIEW OUTPUT ERRORS from the
Review Errors Menu.
3. The Run Time Error Log pop-up window appears on the left side of
the monitor display. One time-dated output software error appears
in the pop-up window at a time.
4. Use the Trim Knob control to scroll through each logged error and
peruse all of the parameters associated with each output software
error. Rotate the Trim Knob control to move the cursor (>) to a
position for viewing the Next or Previous error as well as the position
that allows the user to Quit viewing output errors.
5. Selecting Quit closes the Run Time Error Log pop-up window and
returns to the Review Errors Menu.
6. The View Input Errors menu causes a Run Time Error Log pop-up
window to appear on the monitor display. The pop-up window now
displays input software errors and provides basically the same
information as the View Output Errors pop-up window provided. The
appearance of both pop-up windows are similar, the difference being
errors that are logged as input versus output to/from the monitor.
7. To clear out the stored run time error logs, use the Trim Knob
control to select the CLEAR OUTPUT ERRORS or CLEAR INPUT
ERRORS menu, respectively.
Immediately after you clear one of the error logs, a message appears
on the upper right side of the display. The message verifies the
actuation of the Trim Knob control for this function.
Transport Pro Patient Monitor
2012659-002
5-19