Connections; Connectors; Connect The Transport Pro Monitor To The Tram Module - GE Transport Pro Service Manual

Connections

Connectors

Connect the Transport Pro Monitor to the Tram Module

3-8
Installation: Connections
A
B
C
Name
A video in
B Ethernet
C DC power
Insert the "curly" data cable into the display's Video In connector and
into the Tram module's DISPLAY connector. The Tram module's
DISPLAY connector is located on the front of the Tram module.
127(
On some Tram modules, this connector is labeled DISPL.
Transport Pro Patient Monitor
2012659-002
843A
Description
Connect the Tram module data cable to provide
communication between the Tram module and
the monitor.
Use to download software updates from a personal
computer. See the Transport Pro Patient Monitor
Software Installation Instructions.
The monitor does NOT communicate on an
Ethernet network at this time. This connector is
intended for software downloads only.
Connect the external power supply cable to the
display and to an AC power source. The external
power supply provides power to the monitor, Tram
module, and charges the monitor's batteries.
Revision A