Table of Contents
Advertisement
Data Cable
Batteries
Optional Components
External Power Supply
Cadex SMart Two+ External Battery Charger
2-4
Equipment Overview: Equipment Description
A cable is connected between the Tram module and the display. This
cable provides a communication pathway between the two devices.
The monitor is designed to operate on battery power during transport or
whenever AC power is interrupted. A complete battery management
system allows you to obtain maximum battery performance. Audible and
visual alarms alert you when loss of power is imminent and on-screen
capacity gauges indicate battery charge condition and capacity.
The external power supply provides power to the display and to the Tram
module. When batteries are inserted into the monitor, the external power
supply will also charge the batteries.
The external battery charger can hold and charge up to two batteries.
When you select the Target Capacity switch on the charger, the
charger compares the battery's performance to a 60%, 70%, or 80% target
capacity set on the battery charger. If the battery fails to meet the target
performance, the battery charger will prompt you to condition the
battery. If the battery does not hold a charge, then the battery charger
will illuminate a "fail" light.
Transport Pro Patient Monitor
2012659-002
Revision A
Advertisement
Table of Contents
Troubleshooting
