Table of Contents
Advertisement
Install or Remove a Module
Revision A
Installation: Install or Remove a Module
A module can be easily installed and removed.
To install a module follow this procedure:
1. Facing the chute, guide the back end of the module into the slot.
2. Gently push the module into the chute. You will hear a click when
the module is fully inserted.
To remove a module follow this procedure:
1. Release levers are found on each side on the front of the module.
2. Press and hold the release levers simultaneously and pull the module
out about 15 cm (six inches).
3. Once released, grasp the module firmly with both hands and remove
the rest of the way. Do not try to hold the module by the release
levers.
Transport Pro Patient Monitor
2012659-002
3-7
Advertisement
Table of Contents
Troubleshooting
