Equipment Description; The Transport Pro Monitor; Basic System Components - GE Transport Pro Service Manual

Equipment Description

The Transport Pro Monitor

Basic System Components

Transport Pro Display/Processing Unit
Tram Module
Tram Chute
Revision A
Equipment Overview: Equipment Description
The monitor is a portable display for the Tram modules to provide a
means of displaying patient parameters and data from the Tram during
patient transport.
Two rechargeable, lithium-Ion batteries provide power to the display and
Tram during transport. An external power supply connector is provided
to power the unit from an AC power source and to recharge the batteries.
An asynchronous communication port is provided for communications
with the Tram module. Unity Network (twisted-pair Ethernet) hardware
is provided on the display, but Unity Network functionality is not
available in V1A.
The Transport Pro monitoring system consists of the following
components:
Transport Pro display/processing unit
Tram module
Tram chute
Data cable ("curly" cable)
Batteries (two)
Optional external power supply (AC power-to DC-power converter)
Optional external battery charger
The display/processing unit consists of the following sub-components.
Flat-panel display
Main control/indicator panel
Processor/Power management circuit board and speaker
Rear housing
The monitor uses a Tram module to acquire patient data. See
Module Compatibility" on page 2-10
modules.
The detachable Tram chute is used to secure one Tram module to the
monitor during patient transport.
Transport Pro Patient Monitor
2012659-002
for a list of compatible Tram
"Tram
2-3