Table of Contents
Advertisement
Revision A
Parts List, Drawings, and Replacement: Disassembly/Assembly of FRUs
4. Squeeze the connector tabs and pull out the connector from the
keypad PCB.
5. Pull out the display friction connector from the main PCB. Do not
pull on the ribbon cable.
6. Remove the main PCB assembly and place on a flat surface.
7. Place the display sub-assembly face-down with the Trim Knob
control hanging over the edge of the work surface.
Transport Pro Patient Monitor
2012659-002
880A
881A
6-35
Advertisement
Table of Contents
Troubleshooting
