GE Transport Pro Service Manual page 87

To Exit the Boot Loader program
Revision A
Troubleshooting: Service Menus
Boot Loader Service Menu Options (Continued)
Menu Option
WAKE UP BATTERY
OPTIONS MENU
The only way to exit the Boot Loader program is to manually reboot the
monitor.
1. Hold down NBP GO/STOP and ZERO ALL.
2. Press and release the Trim Knob control.
3. Release NBP GO/STOP and ZERO ALL. The monitor will boot up
into normal mode.
Transport Pro Patient Monitor
2012659-002
Description
This option is used when the battery is dead. See
"Battery Error Message" on page 5-23
Wake Up the Battery" on page
This menu contains the option to clear the
configuration memory.
and "How to
4-14.
5-15