Power Outlet Test - GE Transport Pro Service Manual

Test Equipment

Power Outlet Test

4-18
Maintenance: Electrical Safety Tests
The recommended test equipment required to perform electrical safety
tests is listed below.
Item
Leakage Current Tester
Digital Multimeter (DMM)
Ground Bond Tester
ECG Test Body
External power supply for the monitor
127(
The device under test includes the monitor and the optional external
power supply.
Before starting the tests, the power outlet from which the monitoring
device will get electrical power must be checked. This test checks the
condition of the power outlet to ensure correct results from leakage tests.
For international power outlets, refer to the internal standards agencies
of that particular country. Use a digital multimeter to ensure the power
outlet is wired properly.
If other than normal polarity and ground is indicated, corrective action
must be taken before proceeding. The results of the following tests will be
meaningless unless a properly wired power outlet is used.
Transport Pro Patient Monitor
2012659-002
Specification
Equivalent to the circuits shown
AC volts, ohms
0 – 1 ohm
All leads together
PN 2012183-001
Revision A