Service Mode Menu - GE Transport Pro Service Manual

Service Mode Menu

5-16
Troubleshooting: Service Menus
The Service Mode menu provides the user access to several general and
technical built-in software functions of the monitor. Only persons
responsible for configuring and maintaining the monitor should access
the service mode menu option items.
:$51,1*6
The Service Mode menu is intended for use only by
qualified service technicians. Experimentation with
service mode menu option items can be detrimental to
the monitor. Lost patient data, damaged operating
system software for the monitor, even network related
problems are but a few examples of problems that can be
induced as the result of tampering with service mode
menu option items.
Some of the service mode menu option items are to be
used only by qualified service technicians and others are
for general use. Because of this, unnecessary tampering
with service mode menu option items for experimentation
purposes is not recommended by GE and may cause a
malfunction of the monitor.
The Service Mode menu is used for initial setup and configuration as well
as for troubleshooting. ALWAYS use caution when using any of these
password-protected functions.
The service technician can use the Service Mode menu to:
Relay software information to design engineers.
Set admit menu options, operating mode of the monitor, and monitor
default password.
Configure the monitor unit name, bed number and Internet address.
Do NOT use ANY of these options unless specifically instructed to do so.
Transport Pro Patient Monitor
2012659-002
Revision A