Specifications; Mechanical Specifications; Electrical Specifications; Environmental Specifications - Kontron ePanel-C3 Technical Manual

Hide thumbs Also See for ePanel-C3:
Table of Contents

Advertisement

Technical Manual

11. SPECIFICATIONS

11.1. Mechanical specifications

Dimensions (length x width):
Height:

11.2. Electrical specifications

Supply voltage:
Supply voltage ripple:
Supply current 1 GHz (typical, see Note 1):
Supply current 733 MHz (typical, see Note 1):
Supply current 300 MHz (typical, see Note 1):
Note 1: with 256 MB DDR-RAM, w/o Flatpanel and Backlight Inverter, Prompt at System BIOS Setup

11.3. Environmental specifications

Temperature:
Humidity:
Note 2: The maximum operating temperature is the maximum measurable temperature on any spot on the modules
surface. It is the user's responsibility to maintain this temperature within the specification, which is set by the IC
manufacturer.
ePanel-C3
180,0 x 140,0 mm
approx. 15 mm (21mm with Heatspreader and Fan)
8V DC up to 28V DC +/- 10%
100 mV peak to peak 0 - 20 MHz
2325mA @ 8V DC
1550mA @ 12V DC
780mA @ 24V DC
2070mA @ 8V DC
1370mA @ 12V DC
695mA @ 24V DC
1550mA @ 8V DC
1030mA @ 12V DC
520mA @ 24V DC
operating: +5 °C to +55 °C (Note 2)
non operating: -10 °C to +85 °C
operating: 10% to 90% (non-condensing)
non operating: 5% to 95% (non-condensing)
Page 69 of 71 Pages
Version 1.04
(ca. 18.6 W)
(ca. 18.6 W)
(ca. 18.8 W)
(ca. 16.5W)
(ca. 16.4 W)
(ca. 16.7W)
(ca. 12,4W)
(ca. 12.3 W)
(ca. 12.5W)

Advertisement

Table of Contents
loading

Table of Contents