Resource List And I/O Map - Kontron ePanel-C3 Technical Manual

Technical Manual

4. RESOURCE LIST AND I/O MAP

IRQ # Used for
0 Timer0
1 Keyboard
2 Cascade
3 COM2
4 COM1
5 PCI device
6 FDC
7 LPT1
8 RTC
9 Cascade / ACPI
10 PCI device
11 PCI device
12 PS/2 Mouse
13 FPU
14 IDE0
15 IDE1
DMA # Used for
0
1
2 FDC
3
4 Cascade
5 IrDA
6
7
Upper Memory
C0000h – CFFFFh VGA BIOS
D0000h – DFFFFh Plug&Play
E0000h – EFFFFh System-BIOS
F0000h – EC000h System BIOS
The I/O-port addresses of the
Following the additional I/O ports which are used on this board:
I/O addr.
00-FF System devices (e.g. DMA, RTC, Keyboard)
170-17F Secondary IDE
1F0-1F7 Primary IDE
278-28F LPT2
2E8-2EF COM4
2F8-2FF COM2
378-37F LPT1
3B0-3DF VGA
3E8-3EF COM3
3F0-3F7 Disk controller
3F8-3FF COM1
400-40F Reserved
4D0-4D1 Reserved
680-68F Reserved
800-87F Reserved
A40-A47 TVIn interface
CF8-CFF PCI Configuration Address/Data
E000-EFFF Reserved
Note 1: if the 'used for'-device is disabled in setup, the corresponding interrupt, DMA or I/O-address is available for other
devices.
Note 2: if the corresponding interrupt is set to "Reserved" it cannot be used anymore by the internal PCI device.
Note 3: this I/O-Range is only decoded in 10 bits. That means the register will be mirrored in the memory every 1024
bytes.
ePanel-C3
available comment
No
No
No
Yes Note (1). Default: disabled
No Note (1)
No PCI interrupt. Note (2)
No Note (1)
No Note (1)
No
No
No PCI interrupt. Note (2)
No PCI interrupt. Note (2)
Yes Note (1). Default: disabled
No
No Note (1)
No Note (1)
available comment
Yes
Yes
No Note (1)
Yes
No
Yes Note (1). Default: disabled
Yes
Yes
used for Available comment
No
Yes
No
No
ePanel-C3
are functionally identical with a standard PC/AT.
used for
Page 9 of 71 Pages
available comment
No
No Note (1)
No Note (1)
Yes Note (1)
Yes Note (1)
Yes Note (1). Default: disabled
No Note (1)
No Note (3)
Yes Note (1)
No Note (1)
No Note (1)
No
No
No
No
No
No
No
Version 1.04