Table of Contents
Advertisement
Technical Manual
ePanel-C3
Version 1.04
ACPI General Configuration
Suspend Mode
Only S3 mode (Suspend to RAM = STR) is supported. Most of the components are powered down. Therefore
the power consumption is nearly 100 mA at 12V. It is only possible to get out of the S3 mode by pressing the
power button. This feature will be implemented with Hardware Revision 1.03 and BIOS Version 2.00 or higher.
Repost Video on S3 Resume
Set this value to allow video repost support. The default setting is Yes. If this option is disabled you could have
faulty displayed graphics mainly on the LCD panel.
ACPI Version Security (from BIOS version 2.02)
By default the power management is disabled when 'CRT only' or 'CRT+TVOut' selected. From hardware revi-
sion 1.03 on, using this setting the power management may be enabled.
Attention: Never activate this on a hardware revision 1.01.
Page 36 of 71 Pages
Advertisement
Table of Contents
