Table of Contents
Advertisement
Technical Manual
ePanel-C3
Version 1.04
Boot Settings Configuration
Quick Boot
Disabled allow the BIOS to perform all POST tests. Enabled allow the BIOS to skip certain POST tests to boot
faster (Default).
Quiet Boot
Disabled allow the BIOS to display the POST messages (Default). Enabled allow the BIOS to display the
OEM logo.
AddOn ROM Display Mode
Keep Current keeps the current display mode, Force BIOS switches to BIOS mode before an Add-On ROM is
called (Default).
Bootup Num-Lock
Off does not enable the keyboard Num-Lock automatically. To use the 10 keys on the keyboard, press the
Num-Lock key located on the upper left-hand corner of the 10 key pad. The Num-Lock LED on the keyboard
will light up when the Num-Lock is engaged. On allow the Num-Lock on the keyboard to be enabled
automatically when the system is boot up (Default).
Typematic Rate
Slow sets the rate the computer repeats a key to under 8 times per second. Fast sets the rate the computer
repeats a key to over 20 times per second (Default).
System Keyboard
Absent prevent the computer system from using a keyboard. Use this option if there is no keyboard attached to
the computer system. Present must be set if a keyboard is to be used (Default).
Boot To OS/2
Yes allows the computer system to boot up to an IBM OS/2 environment when more than 64 MB of system
memory is installed. No is the standard setting for all other operationg systems (Default).
Wait For 'F1' If Error
Enabled allows the system BIOS to wait for any error (Default). If an error is detected, pressing <F1> will enter
Setup and the BIOS setting can be adjusted to fix the problem. This normally happens when the system BIOS
is updated. Disabled, on the other hand, continues the boot process without waiting.
Hit 'DEL' Message Display
Enabled allows the system to display Hit Del to enter Setup during memory initialization (Default). Disabled
suppresses this message.
Page 41 of 71 Pages
Advertisement
Table of Contents
