Table of Contents
Advertisement
Technical Manual
ePanel-C3
Version 1.04
Boot TV Screen
Enables or Disables the analog TVOut output (Default: Disabled). Upon changing to Enabled, the two
following options appear (TV Output Mode to Boot TV Output).
TV Output Mode
Defines the Video Mode as PALx (diverse PAL standards) or NTSC (Default: PAL).
Boot TV Output
The TVOut output is already active during boot-up. This option defines the type of signal: either CVBS
(Composite), S-Video or RGB (found on SCART connectors).
Page 53 of 71 Pages
Advertisement
Table of Contents
