AT8902M
Table 1-5:
AM4310 Main Specifications
AM4310
Broadcom 8704
10GbE PHY
XAUI Interface (AMC
Connector)
Front panel
Mechanical
Power Requirements
Temperature
Humidity
Altitude
Vibration
Shock
•
4-Lane XAUI Interface (3.125 Gbps)
•
XFP Interface
•
Loss of signal detection
•
Standard compliant 802.3ae
•
IEEE 1149.1 (JTAG) boundary scan
•
Fabric Fabric channels 1-5: 2 x GbE (1000BASE-BX)
•
Fabric channels 6-15: 1 x GbE (1000BASE-BX)
•
channels 4-11: 2 x 10GbE
•
Fabric channel 12: XG management interface (MDIO)
•
2 XFP cages
•
Standard full height/single width AMC compliant to PICMG 3.0
•
73.6 mm x 180.7 mm (2.898" x 7.114")
•
65Maximum: 24W175
•
Operating Voltage: 3.0 to 3.6V Management, 10 to 14V Payload
Designed to meet or exceed the following:
•
Air Flow: 30 CFM min
•
Operating: 0°C to +55°C (32°F to 131°F)
•
Non-operating: -40°C to +70°C (-40°F to 158°F)
Designed to meet or exceed the following:
•
Bellcore GR63, Section 4.1
•
Operating: 15%-90% (non-condensing) at 55°C (131°F)
•
Non-Operating: 5%-95% (non-condensing) at 40°C (104°F)
Designed to meet or exceed the following:
•
Operating: 4000 m (13123 ft))
•
Non-Operating: 15000m (49212 ft)
Designed to meet or exceed the following:
•
Bellcore GR-63, Section 4.4
•
Operating: 1.0G, 5-500Hz each axis
•
Non-operating: 0.5G, 5-50Hz; 3.0G, 50-500Hz each axis
Designed to meet or exceed the following:
•
DIN/IEC 60068-2-27
•
Bellcore GR-63, Section 4.3
•
30G, half-sine 11ms, each axis
Page 1 - 10
SPECIFICATIONS
AT8902M User Guide
Introduction