Table of Contents
Advertisement
Technical Manual
ePanel-C3
Version 1.04
6.1.4. PCI/PnP Setup
PCI Latency Timer
Set this value to allow the Master Latency Timer to be adjusted. This option sets the Master Latency of most
PCI devices (Exception: Bridges e.g. PCI-To-ISA-Bridge, IDE and Audio Controller) on the PCI bus.
Allocate IRQ to PCI VGA
Allows you to assign an interrupt for the VGA Controller. If this option is deactivated graphic errors could occur
while running a Windows operating system.
IRQx
Set this value to allow the IRQ settings to be modified. Reserved means that this interrupt is a legacy interrupt
(e.g. 16 bit PC-Cards). Available means that this interrupt can be used as a PCI interrupt.
DMA Channel x
Set this value to allow the DMA setting to be modified. Reserved means that this DMA channel is legacy DMA.
Available means that this DMA channel can be used as PCI DMA.
Page 39 of 71 Pages
Advertisement
Table of Contents
