Table of Contents
Advertisement
Technical Manual
ePanel-C3
Version 1.04
SUPER I/O CONFIGURATION SCREEN
OnBoard Floppy Controller
Enabled activates the Floppy Controller. Disabled releases the corresponding resources (IRQ6, DMA2).
Serial Port1 Address
This option specifies the base I/O port address and interrupt request address of Serial port 1.
Serial Port2 Address
This option specifies the base I/O port address and interrupt request address of Serial port 2.
Parallel Port Address
This option specifies the I/O address used by the parallel port.
Parallel Port Mode
This option specifies the parallel port mode (Normal = Uni-Directional, Bi-Directional and EPP).
Parallel Port IRQ
This option specifies the IRQ used by the parallel port.
Onboard FIR Port
Enabled activates the Fast Infrared Port. As additional resources, FIR requires an interrupt and a DMA channel
(16 Bit).
Page 51 of 71 Pages
Advertisement
Table of Contents
