Table of Contents
Advertisement
Technical Manual
ePanel-C3
Version 1.04
IDE CONFIGURATION SCREEN
From the IDE Configuration screen, press <Enter> to access the sub menu for the Primary and Secondary IDE
Master and Slave drives. Use this screen to select options for the Primary and Secondary IDE drives.
OnBoard PCI IDE Controller
Should it be necessary, you can disable the onboard PCI IDE Controller entirely or per channel. This can be
helpful if you need more free system interrupts or I/O addresses.
IDE DMA Transfer
This entry can activate DMA-Mode (default is: PIO-Mode) for IDE devices. Please ensure that your operating
system will work correctly when this option is enabled.
Hard Disk Write Protect
Allows you to write protect the hard disk if the device is accessed through the BIOS.
IDE Detect Time Out
With this option you can set the timeout for ATAPI devices (e.g CDROM-Drives) during the boot process.
ATA(PI) 80Pin Cable Detection
If DMA-Mode is enabled for IDE devices and a high DMA-Mode is being used, it is recommended that you use
an 80 pin cable. Host means the ePanel C3 and Device means the hard disk.
Page 31 of 71 Pages
Advertisement
Table of Contents
