Table of Contents
Advertisement
Technical Manual
5.6.2. Connector X1403 (JILI-Flatpanel-Interface)
JILI_SCL, JILI_SDA
These two pins are functionally suitable for a JILI interface between the graphics controller chip and the
flatpanel cable. Open collector bidirectional signals (LVTTL).
FPVDD
Controls panel digital power. LVTTL output.
BKLT_ON
Backlight power control signal. LVTTL output.
FTX0..3
Differential LCD data output signals for LVDS support (First port LVDS output).
FTXC+-
Differential LCD clock pair output for LVDS support (First port LVDS output).
STX0..3
Differential LCD data output signals for LVDS support (Second port LVDS output).
STXC+-
Differential LCD clock pair output for LVDS support (Second port LVDS output).
5.6.3. Connector X1400 (JILI30-Flatpanel-Interface)
FTX0..3
Differential LCD data output signals for LVDS support (First port LVDS output).
FTXC+-
Differential LCD clock pair output for LVDS support (First port LVDS output).
STX0..3
Differential LCD data output signals for LVDS support (Second port LVDS output).
STXC+-
Differential LCD clock pair output for LVDS support (Second port LVDS output).
SCL, SDA
These two pins are functionally suitable for a JILI interface between the graphics controller chip and the
flatpanel cable. Open collector bidirectional signals ( LVTTL).
DATAENA
Data enable signal for flatpanel.
Panel_VCC
Switched Power supply for flatpanel. Caution: adjust correct voltage setting, default value R1410 = +5V
ePanel-C3
Page 18 of 71 Pages
Version 1.04
Advertisement
Table of Contents
