Analog Input (Ai) Function Block - Emerson Rosemount 5600 Series Reference Manual

Rosemount 5600 Series
ANALOG INPUT (AI)
FUNCTION BLOCK
Table 6-7. AI BLOCK_ERR
Conditions
6-6
This section describes error conditions that are supported by the AI Block.
Read Table 6-8 to determine the appropriate corrective action.
.
Condition
Number Condition Name and Description
0 Other
1 Block Configuration Error: the selected channel carries a measurement that
is incompatible with the engineering units selected in XD_SCALE, the L_TYPE
parameter is not configured, or CHANNEL = zero
3 Simulate Active: Simulation is enabled and the block is using a simulated
value in its execution
7 Input Failure/Process Variable has Bad Status: The hardware is bad, or a
bad status is being simulated
14 Power Up
15 Out of Service: The actual mode is out of service
Reference Manual
00809-0100-4025, Rev AA
May 2003