Overview; Safety Messages; Warnings - Emerson Rosemount 5600 Series Reference Manual

Reference Manual
00809-0100-4025, Rev AA
May 2003
Section 3

OVERVIEW

SAFETY MESSAGES

Warnings

www.rosemount.com
Installation
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
This section contains information on installing the Rosemount 5600
F fieldbus Radar Level Transmitter. For further installation of the
OUNDATION
5600 refer to document 00809-0100-4024. For detailed information about
F fieldbus technology and the function blocks used in the
OUNDATION
Rosemount 5600 Radar Level Transmitter, refer to the Foundation fieldbus
Block manual (00809-0100-4783).
Procedures and instructions in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
raises potential safety issues is indicated by a warning symbol ( ). Refer to
the following safety messages before performing an operation preceded by
this symbol.
Explosions can result in death or serious injury.
• Do not remove the transmitter covers in explosive environments when the
circuit is live.
• Transmitter covers must be fully engaged to meet explosionproof
requirements.
• Before connecting a configuration tool in an explosive atmosphere, make sure
the instruments in the loop are installed in accordance with intrinsically safe or
nonincendive field wiring practices.
Electrical shock can result in death or serious injury.
• Avoid contact with the leads and terminals. High voltage that may be present
on leads can cause electrical shock.
Rosemount 5600 Series