Dimm Removal - Supermicro SuperServer 420GH-TNGR User Manual

3. Align the key of the DIMM module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the DIMM module to
unlock it. Once the DIMM module is loosened, remove it from
the memory slot.
Warning! Please do not use excessive force when pressing the release tabs on the ends of the
DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket. Please
handle DIMM modules with care. Carefully follow all the instructions given on Page 1 of this
chapter to avoid ESD-related damages done to your memory modules or components.
Chapter 3: Maintenance and Component Installation
Key
Notches
Push both ends straight down into the memory slot.
46