HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 27

Rolling style duolite shades, powerview gen 3 automation

Hide thumbs Also See for Vignette Modern Roman Shades:

Table of Contents

Problem

Rechargeable battery needs recharging (continued)

Reinserting the Rechargeable Battery Wand into the Mount

Solution

Match the direction of the arrow on the underside of the battery wand

■

with the arrow on the battery mount.

Insert the nose of the battery wand into the cavity of the battery mount.

■

Push the battery wand flush into the mount until the battery snaps into

■

place.

The battery is charged but the shade does not operate.

Problem

Solution

If your rechargeable battery wand is charged but not working, it may be due

to its physical location in your window. The rechargeable battery wand can

operate in temperatures up to 176°F (80°C). If the temperature in your window

exceeds this, its safety feature will shut the battery off temporarily. The

battery will turn back on once the temperature lowers into the operable range.

If you anticipate the rechargeable battery wand consistently exceeding this

temperature limit, please reinstall in a location that avoids direct sunlight.

Problem

The front fabric appears to cling to the back fabric.

Solution

Lightly apply a static spray for home furnishings. Follow the manufacturer's

directions. Allow the shade to dry in the fully lowered position.

If necessary, reapply the static spray each time the shade is professionally

cleaned.

TROUBLESHOOTING

Table of Contents