HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 17

18V DC Power Supply
NOTE: When power is connected to the motor, a blue LED inside
the control button housing will flash to indicate the shade is ready
for operation.
Plug the power cable from the shade motor into the extension cable.
■
Plug the other end of the extension cable into the 18V DC power supply.
■
Plug the 18V DC power supply into the power source.
■
Proceed to "Operate the Shade" on page 18.
INSTALLATION
Power cable
from shade motor
Extension
cable
18V DC
Power
Supply
15