HunterDouglas Vignette Modern Roman Shades Installation Operation Care
Stacking style shades with powerview motorization
Hide thumbs
Also See for Vignette Modern Roman Shades:
- Installation operation care (24 pages) ,
- Installation operation care (16 pages) ,
- Installation operation care (34 pages)
Related Manuals for HunterDouglas Vignette Modern Roman Shades
Summary of Contents for HunterDouglas Vignette Modern Roman Shades
- Page 1 Installation Operation Care • • Vignette Modern Roman Shades ® Stacking Style PowerView Motorization ®...
-
Page 2: Table Of Contents
CONTENTS Getting Started: Product View ..............1 Tools and Fasteners Needed ......... 2 Installation: Installation Overview ............. 2 STEP 1 — Mount the Installation Brackets ..... 3 STEP 2 — Install the Shade .......... 8 STEP 3 — Connect the Power Source ......10 Attach Magnetic Hold-Down Brackets (Optional) .... -
Page 3: Getting Started
GETTING STARTED Product View 18V Battery Wand Battery Wand Clip Power Cable Programming Installation Brackets Button with Spacer Blocks Standard Top-Down/Bottom-Up Fabric- Covered Headrail Middle Rail Bottom Rail Magnetic Hold-Down Brackets (Optional) Two-On-One Headrail... -
Page 4: Tools And Fasteners Needed
GETTING STARTED/INSTALLATION Thank you for purchasing Hunter Douglas Vignette Modern Roman Shades with PowerView ® ® Motorization. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet and the enclosed packing list before beginning the installation. -
Page 5: Step 1 - Mount The Installation Brackets
INSTALLATION STEP 1 — Mount the Installation Brackets Your order includes the correct number of installation brackets for your shade width, ■ as shown in the table. Shade Width Brackets Required 12" – 36" " – 72" " – 108" "... - Page 6 INSTALLATION Mount the Installation Brackets — Inside Mount Mark 2" in from each jamb for bracket location. ■ If more than two installation brackets came with your order, space additional bracket(s) ➤ evenly between the two end brackets. Mount into wood whenever possible. Allow a minimum of 15"...
- Page 7 INSTALLATION Mount the Installation Brackets — Outside Mount IMPORTANT: Spacer blocks are recommended for the " rear fabric fold clearance or with shades using a battery wand (see spacer block attachment on the following page). Center the headrail over the window opening at the desired height. Use a pencil to lightly ■...
- Page 8 INSTALLATION Pre-drill the screw holes using a " drill bit. ■ CAUTION: Use drywall anchors when mounting into drywall. Attach the installation or extension brackets using the screws provided. ■ IMPORTANT: The front edges of the brackets must be level and aligned to each other. When using spacer blocks: If necessary, first attach the installation bracket to a "...
- Page 9 INSTALLATION Mount the Installation Brackets — End Mount End mount the headrail when conventional mounting techniques will not work — for example, in an arched window. Mount the extension brackets on a flat vertical surface at least 1 " wide. ■ NOTE: Minimum mounting depth for a fully recessed end mount is 2 "...
-
Page 10: Step 2 - Install The Shade
INSTALLATION STEP 2 — Install the Shade If You Have a Battery Wand Clip... Attach the battery wand clip to the headrail. ■ IMPORTANT: Position the clip so that the battery wand will be between installation brackets. A minimum of 15" is needed between the brackets to accommodate the battery wand. Step 1: Hook the battery wand clip onto the back channel of the headrail. - Page 11 INSTALLATION Mount the Headrail Peel back the top edge of the protective covering from the top of the headrail. Leave the rest ■ of the protective covering on the front of the headrail. Lower the fabric 6" before installing the shade. ■...
-
Page 12: Step 3 - Connect The Power Source
INSTALLATION STEP 3 — Connect the Power Source NOTE: When power is connected to the motor, a green LED inside the programming button housing will flash to indicate the shade is ready for operation. Refer to the appropriate page below based on your order. ■... - Page 13 Back of Shade INSTALLATION Check the Power Cord Visible Wire Check to ensure the power cord is not visible from the front of the shade. ■ If it is visible, adhere the wire saddle on the power cord to the back of the shade. ➤...
- Page 14 INSTALLATION Install the cover with the slot aligned to the socket in the battery wand. ■ Battery Wand Cover Slot Socket Plug the power cable from the shade into the ■ extension cable. Battery Wand Cover Plug the other end of the extension cable into Extension ■...
- Page 15 INSTALLATION WARNING: Keep cords and small parts out of the reach of children. They can wrap cords around their necks and STRANGLE. They can also put small parts in their mouths and CHOKE. WARNING: Electric shock and/or a fire hazard may occur if the 18V DC power supply and cables are not properly installed.
-
Page 16: Attach Magnetic Hold-Down Brackets (Optional)
INSTALLATION Attach Magnetic Hold-Down Brackets (Optional) Completely lower the shade. ■ Magnetic Attach the magnetic hold-down bracket onto the ■ Hold-Down bottom rail just inside the end cap, oriented as shown. Bracket Mark the screw locations using one of the mounting ■... -
Page 17: Operation
OPERATION Testing the Shade Check the Power Cord Check the headrail to ensure the cord is not visible. ■ Test the Shade Using the Programming Button Testing the shade with the programming button will allow you to ensure that the motor and power source are working correctly. - Page 18 OPERATION Joining a Shade to a Group IMPORTANT: The shade will not operate using the remote until it has been joined to a group. 1. Press and hold ■ STOP on the remote until the indicator lights blink (approximately 6 seconds).
-
Page 19: Resetting The Shade (If Necessary)
Scene Controller ® For information regarding operation and programming of the PowerView Scene Controller, refer ® to your PowerView Motorization Scene Controller Guide or the online PowerView Step-by-Step Guide at hunterdouglas.com/operating-systems/motorized/powerview-motorization/ manuals. PowerView App Operation ® The PowerView Hub is required for PowerView App operation. -
Page 20: Troubleshooting
OPERATION Resetting Shade Programming The programming reset erases all shade programming from memory, including group assignments, preventing input devices from operating the shade. The primary use is to correct group and network assignments during installation. The reset does not affect travel limits or the favorite position. - Page 21 OPERATION Problem The shade does not operate using the programming button. Solution Unplug the power cable from the motor, then plug it back in. A green LED inside the programming button housing should flash to indicate the motor has power. Check that the batteries in the battery wand, satellite battery pack, or C-size satellite battery wand are correctly inserted and fresh.
- Page 22 CAUTION: Do not steam the fabric on the headrail, middle rail, bottom rail, or back liners. A “Fabric Steaming” video is available on YouTube (Vignette Modern Roman Shades—Fabric Steaming—Hunter Douglas) and from Hunter Douglas Learning and Development at my.hunterdouglas.com.
- Page 23 OPERATION Problem Top-Down/Bottom-Up shades do not appear level. Solution Fabric Panel Leveling If the middle rail or bottom Bottom Rail rail is not level, adjust using Cord Clip the cam lock buttons located on the back of the rail. Unlock button. Hold the cord in bottom rail cord clip and use a flat blade screwdriver to turn the cam lock button...
-
Page 24: Care
CARE Removing the Shade While holding the headrail, lower the shade ■ approximately 4" to access the installation Back of — Roll the headrail bracket. Shade down and out from the bracket. Step 1: While holding the headrail, push back ■... - Page 25 Allow the shade to dry in the completely lowered position. ■ Injection/Extraction Cleaning Vignette Modern Roman Shades can be cleaned by a professional using the injection/extraction method of deep cleaning. CAUTION: Do not use the injection/extraction method of deep cleaning on the headrail or bottom rail fabric.
-
Page 26: Child Safety
CHILD SAFETY WARNING For more safety information call 1-888-501-8364 in the U.S. or 1-800-265-8000 in Canada. Always keep cords out of the reach of children. ■ Move cribs, playpens and other furniture away from cords. Children can climb ■ furniture to get to cords. NOTE: The warning labels on the bottom rails of corded window coverings contain important safety information. -
Page 27: Declarations
Piekstraat 2, 3071 EL Rotterdam, The Netherlands certify and declare under our sole responsibility that assembly PV11 conform with the essential requirements of the EMC directive 2004/108/EC and R&TTE directive 1999/5/EC. A copy of the original declaration of conformity may be found at: www.hunterdouglas.com/RFcertifications. -
Page 28: Warranty
If you are not thoroughly satisfied, simply contact Hunter Douglas at (888) 501-8364 or visit hunterdouglas.com. In support of this policy of consumer satisfaction, we offer our Lifetime Limited Warranty as described below.